Showing posts with label stencil. Show all posts
Showing posts with label stencil. Show all posts

Sunday, 19 November 2017

Transformation - Photo Frame to Vintage Mirror

Hello again Funky-Junkers,
Today I'm going to show you how I converted a wooden photo frame into a vintage style mirror and you won't believe how easy it is to do this!  Here's some pics of my finished mirror...click to enlargen and you can find my tutorial by scrolling down.

Vintage Style Bird Mirror 1
Vintage Style Bird Mirror 2


Vintage Style Bird Mirror 3
Vintage Style Bird Mirror 4
 
Vintage Style Bird Mirror 5
Before and After

I bought the frame on sale for €2.95 which made this project even more wonderful.  You can use a picture frame if you wish, you just need a frame that has glass as that;s what you're going to transform into the mirror.  For this project you will need the following items:

The frame (including the glass)
Mirror Effect Spray (I used gold)
A vintage style stencil
Chalk paint in two colours (I used Ochre and Cream)
Black or Charcoal acrylic paint
Rust acrylic paint
Mouldings or paper/card/wood appliqués
Dark patina
Crackle medium
Vinegar/Water mix 50/50
Spray bottle

First, I painted the frame using the Ochre chalk paint and when it was fully dry, I added a coat of one step crackle (Daily Arts). This has to be left to dry before the second coat of paint is applied (I used cream).  Take note that when you are painting this coat on you cannot paint over the same spot twice so make sure you load the brush well with the chalk paint.  This is so that the crackle takes effect properly and you can see the cracks which will start to appear as the paint dries.

Next, I worked on making the glass a mirror.  To do this, you first need to lay your glass flat, face down and place the stencil (I used a reverse stencil) where you want it.  This can be a bit messy so make sure you have some plastic or newspaper  protecting the surface you are working on.

Using the 50/50 vinegar/water mix, spray the back of the glass where ever you want the antiqued /corroded mirror look to be - in my case I mostly sprayed around the edges of the glass.  Using the mirror effect spray in a colour of your choice (usually gold or silver), spray all over the back of the glass.  You will soon see the reaction of the vinegar/water in the areas that you sprayed it.  After a few minutes most of the mirror effect spray will be dry with the exception of the areas that the vinegar was used.  Using some kitchen roll gently dab these areas to take off the excess.  This helps to create the corroded look that you're after.  Remove the stencil and leave aside to dry fully.

While the mirror is drying, paint the inside of the back cover of the picture frame using a dark coloured paint, I used a charcoal colour acrylic.  By the time you have done this, the glass will be dry and you now need to add your appliques.  I used a cardboard kind which I painted in Ochre and then dry-brushed lightly with a rust coloured acrylic paint to give an aged look.  I then tore these into odd sized lengths and stuck them here and there around the inside edge of the frame to give the impression of a broken trim to add to the overall vintage mirror look.

I used dark patina to darken the frame and enhance the cracks, concentrating more on the outside edge and adding the final touch to my antique style mirror.

I was so happy with the result that I went back to the shop and bought another two frames for €2.95 each!  Needless to say I will be doing this again.

I hope you enjoyed this tutorial, please contact me if you have any questions as I would be happy to help with any issues you may have with your project.
Bye for now






Friday, 10 November 2017

Hi Guys,
I am very excited to share my latest furniture upcycle project with you. This time I revamped an old coffee table that I bought online a while back.  It was in a sorry state when I got it but after some TLC including cleaning, sanding, priming painting and varnishing. it now looks a million dollars.  Here are some pics of it before I got started...
Moroccan Style Coffee Table - Before 1
Moroccan Style Coffee Table Before 2
Cleaning
This isn't the first coffee table that I’ve finished and I more or less stuck to the same process as usual for the renewing.  I started with the cleaning which entailed wiping it down with soapy water and a sponge, careful not to soak it too much and when dry giving it a good going-over with sugar soap and finally another wipe down, this time with white spirit.  When this is done you can be sure your items is spotless and ready for the next step.

Sanding
I used a detail palm sander for the top and to get into the nooks and crannies, a dremel and some plain old hand sanding.  This is my least favourite part but if you want a nice finish it’s best not to leave it out.  Another wash down with white spirit and it was ready for priming.

Priming
I always use ZinsserBulls Eye 123 primer, it’s a great product and it also seals - I painted on two coats of this stuff letting the first coat dry before applying the second.  Now I know it's possible to paint directly over almost any surface with chalk paint but I don't, I like a primer to give the paint a good grounding.  However, if you feel this is overkill, and you have a good quality paint, go ahead and and leave this step out.

Painting
Once the primer has dried it's time for the exciting bit - the painting.  I used a light taupe colour chalk paint as a base and applied two coats letting the first coat dry thoroughly before applying the second.

Stenciling
Right from the start I had a half-plan in the back of my head for this table, I knew I wanted to do a Moroccan style finish and as I had creative licence, the stencil had already been put aside for the job. The colour was more or less predefined by the owner's sitting room colour scheme as that's where it would eventually be placed.  For the stenciling I used two different shades of blue paint one a chalk paint and the other an acrylic and I also added some black acrylic for depth,  I used gold acrylic paint for the trim which I think finished the table off nicely.

I placed the stencil and slowly worked across the entire table top.  When I had finished I felt the table was a little unbalanced or top heavy so I used the same stencil to add more of the same Moroccan design across the bar at the lower end of the table and this worked a treat giving it the balance that was missing.

Moroccan Style Coffee Table

Varnishing
Three coats of water based varnish sealed the table and when dry I waxed it over with a little clear wax.  This is it finished.

Moroccan Style Coffee Table - Top View

Moroccan Style Coffee Table - /Close-up

Moroccan Style Coffee Table - Front View

Bye for now

Monday, 4 May 2015

Salle de Bain Plaquette

Another bathroom plaquette just completed, I love these small sized plaquettes which are perfect in kitchen's and bathrooms.  This one is painted with dark grey chalk paint, has a simple stencil, some French writing and light distressing and is finished off with white cord.  I'm currently putting the final touches on another 'Salle de Bain' plaquette which I will post soon.



Sunday, 26 April 2015

Crackle-Glaze Vintage Style Bouquet Plaquette

I was dying to try out crackle-glaze on my Plaquettes to see how it would work out and how it would tie in with the overall look.  In the past, I had only used commercial crackle glaze and was curious to see what effect I would get from a DIY version.  Almost 20 years ago, my first crackle -glaze project was my bathroom floor for which I used shop bought product - it was a huge success and the topic of many a conversation for years later as it added an unusual and quirky look to the bathroom - what pity I didn't keep any photos of it as it has since been tiled over.

Please click in to see a bigger sized picture
 


Anyway, back to the subject in hand, I decided to try out the DIY crackle-glaze on the plaquettes using some PVA and two different coloured paints - above is the result which I am  thrilled with for a first attempt.  This is a great way to achieve the crackle-glaze look without it costing a penny!  I always have PVA and paint in stock anyway but even if you do have to buy some, it is very cheap.

You just paint on your base coat - that's the coat you want to see coming through and in the above pics I used a very pale pink (it looks white), once dry, you paint on your thick or thin coat of PVA depending on what size cracks you want.  Thick = bigger, thin = smaller.  Leave it for a minute or two and then paint on your top layer of paint in the opposite direction to that of the PVA using one stroke.  Do not go over the same spot twice as this will prevent the crackle from appearing.  You will see the cracks appear as it dries.  Simple! This can be used on any surface for different craft projects.

I finished off by using a stencil to add the bouquet in the pale pink colour that was used for the basecoat and then added my usual frame and ribbon etc. These plaquettes make pretty presents for all occasions.

Thanks for stopping by, I hope you like my post.  Please leave any comments or questions below and I will be happy to reply.

Tuesday, 21 April 2015

Le Bain Vintage Style Plaquette


A Shabby distressed look for the bathroom, this Plaquette was made using découpage techniques and some hand-painting and stencilling.  Some colour washing and a little dark wax gave it the 'old' look that it has.  I'll be sorry to see this one go...

Thursday, 16 April 2015

Painted Bird Plaquette



I have definitely found my niche and my day job is getting in the way..........what to do?  A lotto win would remedy the situation but until then I will have to battle on with my blogging and creative work on a part-time basis i.e. nights and weekends!!

That said, I have a few new Plaquettes on the go and this here is the first of the batch.  It's great thinking up new ideas and designs, experimenting with colour and different textures and finishes and I am very happy with the results as my pictures are looking good.

This lovely plaquette is base coated with a dark grey chalk paint (my own mix) - I used 3 coats to get a more solid colour.  I then taped up a bouquet stencil with decorators tape just leaving out the sections I wanted to use on the piece and I taped it lightly to the dry painted wood.  I couldn't find a bird stencil that I liked anywhere so I made one. I found a bird outline on the internet, printed it out, traced it onto card and used a craft knife to cut it out.  Really handy as I can keep it for other jobs!

Be careful when painting over the stencils not to use too much paint.  I prefer to use a stencil brush but you can use a sponge if you prefer.  It's best if the brush is almost dry so blot it on some paper before applying it. Remember, you can always add more paint but you can't take it away.  I used a rhinestone for the bird's eye which I glued on.  I sealed it up with about 6 coats of sealant and then waxed it for the final coat.  I used some shiny silver ribbon for hanging it, which I found in my supply and which I thinks adds to the piece.

These make great presents for any occasion.